Deluxe Wax Seal Presentation Box
We will be operating a reduced service between 14th March - 7th April 2023
Production will be closed from the 25th March and begin again on the 3rd April 2023
We apologies for the inconvenience.
How to apply to your sealing wax:
After achieving your bubble of sealing wax, dab the seal on the stamp pad, possibly a few times to ensure adequate coverage of the stamp pad in ink, and then stamp the sealing wax as normal.
It is recommended to keep the stamp head temperature as low as possible, this can be achieved with the use of ice.
Please ensure the stamp head is dry before use dipping in the ink pad.
Size: 34 x 34mm approx (size of base not ink pad) Suitable for 22mm - 25mm size wax stamp.
example using the gold stamp head.....
Lovely little ink pad and perfect for my winter themed rubber stamps! Smooth and fast transaction and friendly company - many thanks!
A must have! Simple and will make your wax seals pop that extra bit more. It really shows off the detailing for the design (on your seal). Of course gold works too, depending on the colour tone of the wax you are using. This little box has plenty of room for the face of the brass seal to sit on, so that the face is covered.
I bought the gold and silver inkpads for my custom stamp after seeing what a difference the inks made to the quality of my seals. The pigments are bold and vibrant, and they bring out a greater definition in your design against the wax of the seals. I did buy the 34x34 inkpads assuming that it would fit the size of my 30mm stamp, however the actual inkpad area is slightly smaller so I don't get full coverage when stamping my seal into the inkpad. Despite this, it's fine if I apply the inkpad to the stamp like one might do with other crafting stamps. I would probably recommend the larger inkpads for stamps that are 30mm and larger, but these are perfect for smaller stamps.