SAFETY WARNINGS: Tear Ribbons
POTENTIAL RISKS
- This product is non-toxic but is not intended for ingestion.
- Adhesive may cause minor skin irritation in sensitive individuals.
- Edges of the tape may cause minor cuts if handled improperly.
- Flammable—keep away from open flames and high heat sources.
- Not safe for kids – Keep out of reach of children under the age of 12. Children under 16 should be supervised by a responsible adult when using this product.
FIRST AID MEASURES
- Skin Contact: If adhesive sticks to the skin, gently peel it off. Wash the affected area with soap and water if irritation occurs.
- Eye Contact: If tape or adhesive contacts the eyes, rinse thoroughly with water for several minutes. Seek medical attention if irritation persists.
- Inhalation: Not applicable under normal use. If exposed to burning fumes, move to fresh air. Seek medical attention if breathing difficulties occur.
- Ingestion: Not intended for consumption. If swallowed, drink water and seek medical advice if discomfort occurs.
FIRE SAFETY
- Flammable—keep away from open flames, sparks, and high heat.
- If ignited, extinguish with water, foam, dry chemical, or CO₂ fire extinguishers.
- Burning may release fumes; avoid inhaling smoke.
CLEANUP, STORAGE & DISPOSAL
- Cleanup: If tape adheres to unwanted surfaces, remove it carefully. Residual adhesive can be cleaned with an appropriate adhesive remover.
- Storage: Store in a cool, dry place away from direct sunlight and heat sources. Keep out of reach of children.
- Disposal: Dispose of according to local regulations. Typically, this product can be discarded with general waste.
USING IT SAFELY
- Use clean, dry hands when handling to prevent unintended adhesion.
- Apply to dry, clean surfaces for best results.
- Do not expose to open flames or extreme heat.
- Keep out of reach of small children to prevent accidental ingestion or misuse.
Disclaimer: The information provided is based on current knowledge and intended for safe handling and disposal. Users are responsible for compliance with local regulations.
INSTRUCTIONS
Materials Needed:
- Tear Ribbons
- Bottle to be sealed
- Scissors (optional)
How to use:
- Prepare the Bottle
- Ensure the bottle surface is clean, dry, and free of dust or grease for proper adhesion.
- Cut the Ribbon
- Measure and cut the required length of Tear Ribbons using scissors only.
- Apply the Ribbon
- Remove the paper backing from the Tear Ribbon to reveal the adhesive.
- Position the ribbon around the bottle’s neck or cap, ensuring a smooth and even application.
- Leave a small amount of the ribbon sticking out from the bottle so it can be pulled to break the wax once dipped.
- Press the ribbon firmly onto the surface to ensure it sticks securely.
- To Open the Seal
- After dipping the bottle in wax, locate the tear strip that is sticking out and pull gently to break the wax seal for easy bottle opening.