SAFETY WARNINGS: Wax Beads
POTENTIAL RISKS
- Hot wax can burn your skin – Be careful when handling!
- Fumes may cause slight irritation – Use in a ventilated space.
- Not safe for kids – Keep out of reach of children under the age of 12, Children aged under 16 should be supervised by a responsible adult when using our products.
FIRST AID MEASURES
- Burns: For a minor burn, run cool water over it for 10–15 minutes, then pat dry and apply aloe vera or a mild lotion. Cover with a sterile bandage or cling film and avoid popping blisters. Seek medical help for severe burns. Avoid using ice, as it can worsen the injury
- Eye Contact: Rinse with lukewarm water for several minutes. See a doctor if needed.
- Inhalation: The wax is too hot, turn the temperature down or off and step outside for fresh air.
- Ingestion: Don’t make yourself vomit. Seek medical help.
FIRE SAFETY
- What to use if it catches fire? CO2, dry chemical, or foam extinguisher.
- What NOT to use? Water on hot wax—it can splatter!
- Firefighters’ advice: Overheated wax can release flammable fumes.
CLEANUP, STORAGE & DISPOSAL
- Spills? Let the wax cool and harden before cleaning.
- Storage: Keep in a cool, dry place away from heat or open flames.
- Disposal: Do not pour hot wax down the drain. Once cooled and solidified, dispose of it in general waste. If disposing of large amounts, consider taking it to a waste recycling facility that accepts wax-based products.
USING IT SAFELY
- Wear gloves when handling hot wax.
- Use safety glasses if working with large amounts.
- Ventilate the area if melting large batches.
Disclaimer: The information provided is based on current knowledge and intended for safe handling and disposal. Users are responsible for compliance with local regulations.
INSTRUCTIONS FOR USE
Materials Needed:
- Sealing wax beads
- Wax melting spoon
- Heat source (candle, tea light, or wax furnace)
- Wax seal stamp
- Non-stick surface (parchment paper, silicone mat, or directly on the envelope)
Step-by-Step Instructions:
- Melt the Wax
- Place the wax beads into the wax melting spoon. Adjust the quantity based on the desired wax pool size.
- Hold the spoon over your heat source, keeping it at a safe distance to prevent overheating. Stir gently until the wax becomes fully melted and smooth.
- Pour the Wax
- Carefully pour the melted wax onto your desired surface to form an even wax pool.
- Stamp the Wax
- Immediately press your wax seal stamp into the melted wax. Hold it steady for 10-15 seconds to allow the wax to set.
- Remove the Stamp
- Gently lift the stamp straight up to reveal your wax seal. Let the wax cool completely before handling.
- Clean Up
- Wipe any excess wax from your spoon while it is still warm, using a paper towel. Be cautious, as the spoon may be hot.
Additional Tips:
- To prevent the stamp from sticking, you can lightly chill it before putting into the wax.
- Experiment with mixing different wax colours for a marbled effect.
- Store unused wax beads in a cool, dry place to prevent melting and discolouring.